Trailed sweeper behind a tractor with power from 22 kW (30 HP) and min. weight 1675 kg
Garaged.
Little-used.
Fully functional. Remote control from the tractor cab.
Approved for use on roads (has special vehicle technical certificate)
- DEMO (demonstration) machine, driven only 9 operating hours. It was used exclusively by the selling company when demonstrating the function of the technology. The technical condition is very good.
The machine was put into operation in January 2019, year of manufacture 2015. The machine is permanently stored in a dry closed hall.
-Drive from the rear PTO shaft of the tractor (540 rpm), the hydraulic pump is simply mounted directly on the PTO shaft of the tractor (no cardan shaft required). The machine thus has its own independent hydraulic circuit (Danfoss hydraulic motors and hydraulic valves).
- Control box for placement in the tractor cabin.
- A system of two side sweeping brushes at the front, dirt is lifted into the tank by the main wide cylindrical brush at the back (the advantage of mechanical collection is high efficiency, reliability and very low noise, since the machine has no suction turbine).
- Sweeping brushes sprinkled with water (electric diaphragm pump/water tank volume 400 l).
The adjustable sweeping width is in the range of 1500 – 1900 mm, the volume of the trash container is 1,150 liters, the height of the hydraul. magazine tipping 1,500 mm, transport speed 30 km/h. Smooth regulation of brush rotations.
- Hydraulically swingable drawbar for lateral extension relative to the driving axis (better handling).
- The side brushing brushes and the main cylindrical brush are equipped with a device for automatically adjusting the pressure of the brushes,
- The machine meets the dust standard PM 10 *** (i.e. capture of dust particles up to 10 µm in size).
- Parking brake and handbrake
- Length (without drawbar / with drawbar): 3,000 mm / 3,730 mm
- Height: 1,550 mm / Width: 1,430 mm
- Own weight: approx. 1,380 kg / Total weight: 2,700 kg
Technical condition corresponds to age and mileage/motor hours. Personal inspection is required. Later complaints will not be taken into account.
The technical condition corresponds to age and mileage / operating hours. Personal inspection is required. Later claims shall not be taken into account.
This text has been translated using Google Translate. Veacom is not liable for any inaccuracies or misunderstandings which arise through the translation.